![]() ![]() ![]() For best results, store on a drive other than where the operating system and application reside. Multiple shows can be Clips are not stored internally within the Show File, they are simply references of clips on a hard drive or network. PlaybackPro Plus saves shows as individual documents. Demo mode is generally used for setting up a show off-line, or learning the application. Demo mode is fully-functional, except for a watermark that is displayed on the output. If you do not have a key, click Run As Demo. If you have an Enabler Key, insert it and click Okay. If not found, a dialog box will be displayed. When a Show File is opened, the application looks for the USB Enabler Key. To manually change the output resolution (or aspect ratio if no external display is present), click Setup in the top right corner of the Program Screen. PlaybackPro Plus automatically adjusts to the aspect ratio of the external display. The secondary output (which can be reordered under Displays, in the Hardware Section of System Preferences) is for playback. The primary screen (the one with menus) is for the interface. It is designed to run on a system with two outputs (or a laptop with an external output). PlaybackPro Plus scales to any hardware, but may be limited by the computer s processor speed, disk bandwidth and graphics power. PlaybackPro Plus requires Mac OSX 10.5 (Leopard) or newer. PlaybackPro Plus can be used with the SimpleSync application for easy and flexible multiple machine synchronization (sync rolls). For HD playback, a MacPro with an internal or external RAID array is recommended. When doing a mix transition, two clips are playing simultaneously, which requires much greater computer resources. Subsequently, the operator must be aware of machine limitations (especially disk bandwidth). ![]() When a clip is placed in Preview it is automatically and immediately pre-rolled, even if a clip is playing in Program. In order to do Cuts and Transitions, a Preview clip must be pre-rolled while the Program clip is playing. 9 SimpleSync Basics Controls Direct Command Clock Sync NTP Basics Networking Setting up an NTP Server Setting up NTP Clients Troubleshooting NTP UDP and TCP IP Basics The UDP and TCP PlaybackPro Plus Protocol Keyboard Shortcuts System Settings ģ Operation Before You Begin: PlaybackPro Plus is a multi channel player, with more extensive controls for advanced operators than PlaybackPro. The software can be downloaded at and will run in demo mode unless a software key is detected.2 Table of Contents PlaybackPro Plus Operation. PlaybackPro works with SimpleSync, which allows easy sync rolls across multiple machines. All effects are rendered on the fly.īecause PlaybackPro Plus is a multi-channel (plus mixer) player – allowing cuts and dissolves between clips and many other advanced features – it must be run on a powerful machine with robust resouces: a Macintosh computer running Leopard (10.5) or newer, a Quartz Extreme-capable graphics card, and at least 2GB of RAM. It is completely non-destructive to original video files, allowing the same file to be referenced multiple times with separate in and out points, geometry, and levels. PlaybackPro Plus leads the way with a simple but powerful interface that allows flexibility and control over the playback of video content in what might be called non-linear playback. While the digital revolution has changed the way video is edited, its effects have not yet been truly felt in the live production industry. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |